August 13, 2014 SINGLE at Fakuma

Specialist for temperature-control and cooling systems with many new products for processors
SCT control unit offers more versatility and higher production rates

Read press release

 

 

May 07, 2014 Karsten Sauer appointed new Managing Director

SINGLE Temperiertechnik GmbH, Hochdorf, has appointed Karsten Sauer (41) as new Managing Director. German-born Karsten Sauer has extensive leadership experience and professional knowledge. On 1 April, 2014, he took over from Frank Spork, who was appointed Interim Manager in December 2013.

Read press release

March 20, 2013 With several new features, SINGLE Temperiertechnik GmbH boosts the efficiency of its products

EcoPlus label for highly energy-efficient temperature control and cooling systems

The EcoPlus label for particularly high efficiency and low energy consumption now marks several products across the range of SINGLE Temperiertechnik GmbH, Hochdorf/Germany. This achievement is the result of specific hydraulic, electric or thermally effective special equipment for temperature control systems and cooling systems. Short amortisation times speak in favour of equipping systems with high-quality, efficient components.

Read press release

 

August 23, 2012 More versatility for the production of composite parts

SINGLE presents new ATT features at Composites Europe 2012

At Composites Europe 2012, which takes place from 9 until 11 October, 2012, SINGLE Temperiertechnik GmbH of Hochdorf/Germany will show the new features of its energy-efficient ATT Alternating Temperature Technology for the first time. This new functionality introduces more versatility to the production of composite parts. SINGLE will present its innovations in Düsseldorf, hall 8b, stand F56.

Read press release

 

April 25, 2012 Specialist for temperature control and cooling systems expands production floor and creates new jobs

SINGLE Temperiertechnik GmbH expands production capacity

SINGLE Temperiertechnik GmbH of Hochdorf/Germany has now started operations at its new site and has expanded its production capacity. The well-established manufacturer of temperature control and cooling systems has added a new production hall and offices in close vicinity to the company’s headquarters in Hochdorf near Stuttgart. The company is also looking for new personnel.

Read press release

 

March 9, 2012 Temperature control systems support manufacturers of composite products

SINGLE exhibits hot-water temperature control solutions for large-scale production of composite components at JEC 2012

At JEC, which takes place from 27 to 29 March, 2012 in Paris, SINGLE Temperiertechnik GmbH of Hochdorf/Germany is presenting highly efficient hot-water temperature control systems for temperatures up to 225°C. Fluid-based temperature control facilitates the large-scale production of composites. Technically superior and more energy-efficient, this method has already become established as an alternative to outdated and insufficient oil and electric heaters, and ovens. This approach offers interesting potential particularly for the aerospace and the automotive industry with an interest in producing components with reproducible properties within minimum cycle times. This requires defined process conditions, which means clearly defined temperatures inside the cavity.

Read press release

 

May 17, 2011: SINGLE Temperiertechnik opens branch office in China

Shenzhen office opens after Chinaplas 2011

As of June 2011, SINGLE Temperiertechnik GmbH of Hochdorf/Germany will be present in the Chinese market with its own branch office in Shenzhen. SINGLE will offer Chinese customers a complete range of oil- and water-operated temperature control systems with a maximum heating capacity of 144 kW and for temperatures of between -40°C and +350°C. The company supports international manufacturers and OEMs as well as new customers among Chinese plastics processers with their tried-and-tested technology. At Chinaplas which takes place in Guangzhou from 17 May until 20 May 2011, SINGLE will present a cross-section of its product portfolio (German Pavilion, hall 5.1, stand A52).

Read press release

 

Dec. 03, 2010: German firm to grow from here

Charlotte Business Journal

It's starting to sound like a broken record: A German manufacturing company has chosen Charlotte for its U.S. operations and plans to add employees here.
Germany-based SINGLE Temperature Controls Inc. has opened a U.S. sales, engineering and warehouse operation off South Lakes drive in southwest Charlotte. The 7,900-square-foot operation near Carowinds Boulevard will include a testing and repair facility.

Read article

 

Dec. 03, 2010: German manufacturer opens facility in Charlotte

Announcement Charlotte/NC, USA: Chamber Economic & European Development

SINGLE Temperature Controls, Inc. has opened a full-scale marketing, distribution and service facility in Charlotte. The company is a subsidiary of SINGLE Temperiertechnik GmbH of Hochdorf, Germany, Europe's leading manufacturer of high-performance liquid control systems.

Read announcement

 

June 14, 2010: SINGLE system with integrated flow meter and temperature measurement

SWV water distribution system provides valuable process information for injection moulding medical parts

The compact SWV water distribution system with integrated flow meter presented by SINGLE Temperiertechnik of Hochdorf/Germany meets the exacting requirements encountered during the injection moulding of medical and medical engineering parts. The contour-aligned system distributes cooling or transfer media to up to 32 circuits. Wear-resistant, contamination-free, highly precise and clean, the system provides reliable mould, status and process monitoring data based on flow rate and temperature information from every individual circuit.

Read press release

 

Oct. 13, 2009: SINGLE at Fakuma 2009: ATT - The versatile, active system for variotherm mould temperature control

Alternating temperature control for better-quality injection moulded parts.

Alternating Temperature Technology (ATT) offered by SINGLE Temperiertechnik GmbH of Hochdorf/Germany is a system solution for particularly efficient, variotherm liquid temperature control of injection and compression moulds. The versatile, active and complete system is comprised of one customized temperature control system, specially designed cavity inserts and mould components with near-surface cooling/heating channels.

Read press release

 

Oct. 13, 2009: SINGLE at Fakuma 2009: EcoTemp - Cost-efficient passive system for variotherm mould temperature control

Intermittent temperature control for better-quality injection moulded parts

At Fakuma 2009, SINGLE Temperiertechnik GmbH of Hochdorf/Germany presents EcoTemp, a cost-efficient passive system for variotherm mould temperature control. EcoTemp integrates conventional small temperature control units into a system. This system interrupts mould cooling during the injection phase to allow the cavity wall to heat up. This procedure is followed by a particularly intense cooling phase.

Read press release

 

Oct. 13, 2009: SINGLE at Fakuma 2009: New SWV water distribution system with integrated flow meter for injection moulding machines and moulds

SINGLE presents compact system for distributing cooling or transfer media to multiple circuits.

At Fakuma 2009 in Friedrichshafen/Germany, SINGLE Temperiertechnik GmbH of Hochdorf/Germany presents SWV, a new, compact water distribution system with integrated flow meter. As a central system, SWV distributes cooling or transfer media to up to 32 circuits in injection moulding machines. The system is designed for highly precise, wear-resistant flow metering according to the eddy current method with a metering range of between 1 and 12 or 2 and 40 l/min and temperatures of up to 100°C as standard. With its compact footprint, the new SWV is easily integrated into injection moulding machines or mould spaces.

Read press release

 

August 5, 2009: PMC Smart Solutions present the PMC Optimized Thermal Management System (PMC OTMS)

PMC Medical, of Cincinnati/Ohio, USA, is leading the industry in process development innovation, applying unique injection mold temperature control technology using SINGLE Temperature Controls, Inc., of Charlotte/NC, USA, pressurized water system for high-temperature medical and implantable biomaterial applications.

PMC recently completed a study comparing the performance of electric heat versus the PMC OTMS for injection molding of high-temperature biomaterials, auch as implantable grades of PEEK (Polyetheretherketon). The PMC OTMS study was conducted by PMC Medical in their medical device molding operation located in Shelbyville/IN, USA, using the SINGLE Temperature Controls, Inc. STW 200/1-6-25-H0.2 system.

Read press release

 

July 16, 2009: First NPE presentation proves to be highly successful

Considerable interest in high-tech temperature control solutions from SINGLE Temperature Controls at NPE.

The selection of exhibits presented by SINGLE Temperature Controls, Inc., Charlotte NC, at their own NPE exhibition stand instantly met with an extraordinary response. Visitors from the US displayed a keen interest in the specialist’s high-temperature water control systems for high temperatures of up to 400 F and temperature alternating systems for a high accuracy of reproduction of surface detail in injection molded parts, improved dimensional stability and consistency while reducing cycle times.

Read press release

 

April 2, 2009: SINGLE provides high-performance temperature control of test benches for vehicle technology applications

Test benches are used for intense checks on engines, heat exchangers and many other vehicle components. This requires liquid media with constant or complex temperature profiles. SINGLE Temperiertechnik GmbH of Hochdorf/Germany specialises in the development and production of high-performance temperature control technology for these applications. Recently, the specialist successfully completed several projects for renowned suppliers to the automotive industry based in the vicinity of Stuttgart/Germany. Following these positive results, SINGLE decided to step up its activities in the test bench market. For the first time, SINGLE will be showing its product range at the Testing Expo Europe trade show, which will take place from 16 until 18 June 2009 in Stuttgart.

Read press release

 

March 30, 2009: ACHEMA 2009: Efficient water-operated temperature control for temperatures up to 200°C

SINGLE at ACHEMA 2009:
Temperature control technology for food, chemical and pharmaceutical applications

SINGLE Temperiertechnik GmbH of Hochdorf/Germany offers customised engineering, a wide range of temperature control systems and a variety of services. This package provides tailor-made temperature control and cooling solutions for plant engineering. One of the leading European suppliers of high-performance temperature control systems, SINGLE will present its portfolio at the ACHEMA trade show from 11 until 15 May, 2009, in Frankfurt am Main. Temperature control systems operating with water as a circulating medium will be at the centre of the presentation, as this technology offers a variety of advantages over oil-operated systems.

Read press release

June 11, 2008: SINGLE sets up new US subsidiary and moves into the North American market with enhanced product portfolio

SINGLE Temperiertechnik GmbH of Hochdorf/Germany has stepped up its activities in the US. The new subsidiary SINGLE Temperature Controls, Inc. with headquarters in Charlotte, North Carolina, has consolidated the company’s presence on the North American continent. As one of the leading European manufacturers of high-performance temperature control systems, SINGLE has advanced its level of involvement in the US market from operating a prominent sales agency to setting up its very own subsidiary. In addition to this heightened level of market development, SINGLE has also enhanced its product portfolio for North America.

Read press release

 

May 16, 2008: SINGLE goes strong in China with local sales infrastructure

SINGLE Temperiertechnik GmbH of Hochdorf/Germany has consolidated its presence in the Chinese market.  With the help of native-speakers  among its staff, the manufacturer of high-performance temperature control units has stepped up its activities in the Asian no. 1 growth market. Four sales outlets in Tianjin, Suzhou, Dongguan and Hong Kong provide the complete temperature control units and heat transfer units while also ensuring personal customer support and service by local agents.

Read press release

 

December 2007: Cleaning with Inox Cleaner ® restores the transmission rate of temperature control units / cleaning ‚in situ’.

Hot and cold deposits of any kind (lime, ochre, bio films) reduce the heat exchange - in a boiler just as in process thermostats. A lime layer of 2 mm already reduces the transmission rate of a heat exchanger by approximately 20 %. Manufacturers of temperature control units, such as SINGLE, pay special attention to the design of their units to prevent deposits. Nevertheless every operator has to clean his temperature control unit sooner or later.
(CAV 12/2007)

Read press release